NOVACLEAN PRE-WAH is highly concentrated
specifically designed to remove grit and dissolve dirt, grease, grime, and bugs from your car before contact washing process.
Safe for clear coat and other exterior surface.
Directions:
Shake well and dilute to foamer or foam cannon. Can be used as-is (less foamy), or mix with car shampoo for foamy output.
Spray to car surface when dry and allow to dwell from 3-5 minutes (do not let dry). Rinse thoroughly with pressure washer.
Proceed to contact wash. Do not wash under the sun.
Dilution: 1:30 Manual Foamer
1:10 Foam Cannon
NOVACLEAN DRYING AID is highly concentrated
spray-on solution designed to be applied to a
wet car — right after washing and rinsing, before
you dry. Its job is to break surface-tension of water
on paint, glass, and trim, helping the water run off
quickly and cleanly. This minimizes swirlmarks as
it lessens contact between towel and surface
Directions:
Shake well and dilute to a spray bottle.
After foaming and rinsing, spray deliverately to
all the surface. Rinse once again with pressure
washer. Then wipe excess water with drying towel.
Dilution: 1:30
Note:
Make sure to rinse off the dring aide
thoroughly to prevent clogging of drying towel
when drying.
Caution:
Eye irritant, avoid contact with eyes.
Rinse thoroughly if got contact.
